Customer Management System

There are tons of systems out there trying to improve business processes of utility companies in general or electric companies in specific.

The key is still doing the re-engineering process well and the application system will just a tool to follow the processes. I put some of my thoughts about Electric Management System in this blog. Feel free to read and comment.

Wednesday, July 11, 2007

Process for Bill Production and Delivery

INTRODUCTION
This process consists of the actions that are carried out to inform the customer the amount that he must pay for the utility supply and services that he receives from the Company.
The amount collectible to the customer is detailed in a bill. The bill contains information related to bill items related to the utility usage and services, payment balances, meter information and adjustments if any. For customers who have multiple services in his account, the collectible amount is summarized in a Statement of Account.
Bills are produced daily by batch process after the readings obtained daily from the field are uploaded into the Customer Management System. Upon production, the will immediately be enveloped, prepared and turned over for delivery to the Post Office or any third party courier. Data are also sent to bank for Direct Debit Arrangements.

RESPONSIBILITY
Print Centre Specialist
- Printing of files and summary report
- Preparation of boxes of documents for delivery
- Turn over of boxes to Post Office Contact Person

System Administrator
- Delivery of DD files to banks

REMARKS
Details and agreement about delivery of documents (bills, statements, customer letters, debt notices, disconnection notices, etc.) by the Post Office should be contained in the Memorandum of Agreement between the two parties.

INPUT
Bill information, Account data, Payment balance

OUTPUT
Bills, Statements, Direct Debit Files

OWNER OF THE PROCESS
Business Cycle and Systems Section

CLIENT
Post Office, Benefits.

PROVIDER
Customer Service Management

Customer Assistance Areas

The main channels through which contacts will be done are in the Service Unit or any online payment point in person, by phone or by fax and in the Call Center by phone. The types of contact that can be handled by each of these offices will be limited based on the policy of the company.

Customer Transactions

The following are the customer request in relation to customer assistance:

1. Queries – Pertains to customer request for information related to his electricity supply. Some examples are as follows:
- Status of service application
- Invoice amount and due date
- Payment point information
- Previous payments made

2. Complaint – Pertains to customer expression of disagreement, dispute or discontent with the some services provided by the company.

3. Generation of Work Order – Pertains to customer request for field work. Some of customer request are meter check, temporary disconnection, etc.

4. Correction of System Information – Pertains to receiving request to change some information related to customer, account or service.

Tuesday, July 10, 2007

Data Gathering Preparation: Defining Working Zones/Lots and Assignment of Lots

Prior to the start of field campaign, DG (Data Gatheritn) Project Managers together with the Sub-department Manager will define the location of DGC (Data Gathering Center) in the sub-department where field campaigns will be carried out. This definition will be based on the most effective distances that should be traveled from DGC to location of campaign execution and the availability of room with proper facilities for setting up DGCs.

Once DGC has been set-up, DGC Head and Reading Supervisor will proceed to organize of the data using current route-itinerary sequence with the use of DGMS (Data Gathering Management System). If certain BW (Billing Window/System) has good reference number that contains the sequence of route-itinerary, they can continue with creating of lots. However, if the reference numbers are not reliable, DGC Head and Reading Supervisor should organize the data using their current reading/book card.

The sequenced data will then be broken into lots (creation of lots) that should be gathered by surveyors. This will serve as working zones for surveyors.

Note: A lot is the group of services that are expected can be captured by a team of surveyors in one day. A lot for example, can be a fraction of an actual route-itinerary. By default the number of services in a lot is 30 for rural area and 60 for urban area. However, these numbers are subject to change by DGC Head and reading supervisor for each BW.


All services that will be gathered should be included in the lot. Lot number will be generated automatically by DGMS when creation of lot is done.

The number of gathered services per lot will be used to measure the performance of the performance of DGC as well as surveyors’ performance.

Once the lots are created, the list of lots can be printed using DGMS to have an overview about number of lots for certain BW. This can help DGC Head to analyze whether field campaign could finish on-time based on the number of surveyors available for selected BW.


DGC Head and reading supervisor will assign the lots to surveyors and put the scheduled dates to be carried out. Assignment module of DGMS will be utilized for this process.

Assignment of lots should consider the location of each lot to DGC for effective dispatch of teams.

Note: If there are services that currently certain BW is not reading because they believe it should be passed to another BW based on location, these services should be gathered by BW where the data is currently located. Even if it means that the surveyors have to cross border BW coverage area to gather those information.

Monday, June 25, 2007

Type of Fraud - Meter Tilted / Wrong Position

Meter tilted or in wrong position might cause the meter is not correctly when registering the consumption. This type of Fraud can be intentionally done by customer. Or... the meter can be titled because the technician did not assemble the position firmly. Thus, over the time, the meter position is tilted.

This tilted position of meter can cause the disc to touch the brake and slow down the consumption registering.

meter tilted

Sunday, June 24, 2007

Type of Fraud - Double Feeding

Double feeding is done by customer when he/she tried to make an additional feeding directly to the line so that the consumption for additional feeding is not registered. He/she will still have the legal service and the meter will register only the consumption for the legal service. Usually the additional feeding is done to connect for appliance that requires more electricity load (ex: air condition, pump, etc.) For the rest of appliances like lights, the customer let it register in the legal connection so that the Electric company will not get suspicious.

Thursday, June 14, 2007

Fraud Type - Meter Bypass

meter bypass
This happen when customer tries to bypass the connection so that the meter is not registering the consumption. No action done on the meter by doing such case. This type of fraud is easily detected and easily resolved.

Thursday, June 07, 2007

Fraud Type - Meter Manipulated

Example of meter manipulated:
- Brake manipulated so it touches the disc. It will slow down the disc rotation.
- Space out or braked gears. The rotation of disc will not be recorded correctly.
- External potential open. This will not record any consumption even if the disc is rotating.
- Disc tilted. It will not record the correct consumption.


Visitors